product image
fregex-gallon
A high quality ethylene glycol based engine antifreeze/coolant designed to protect aluminum and all other metals. It meets major automobile manufacturer's specifications for aftermarket antifreeze & coolant.
AVAILABLE PACKAGES:
12 x 1 liter per case
6 x 1250 ml per case
4 x 4 liters per case
15 liters pails

USE: Anti-freeze & coolant
- Anti-freeze for radiator's water
- Summer coolant for the radiator
- Anti-corrosive and protector from calcification in the radiator pipes
- Used for both aluminum and cost-iron engines
- Universal car and truck formula
- Protects aluminum and all other metals
- Patented aluminum protection
- Compatible with other standard brands of antifreeze
- Maximum year around freeze-up / boil over protection
- Meets major automobile manufacturer’s specifications
- Protects against rust and corrosion 

DIRECTIONS FOR USE:
Mix FREGEX with water at a ratio:
FREGEX  H2O  FREEZING POINT
30 70 -16.5°C
40 60 -19.3°C
 

The higher the amount of Fregex the lower the temperature you get. Fregex Antifreeze has been subjected to a wide variety of recognized industry tests designed to measure the coolant's ability to protect an engine from corrosion. 

The results show very low corrosion weight changes by standard ASTM glassware (D-1384), Simulated Service (D-2570) and Vehicle Service (D-2847) test methods. 

CHEMICAL PROPERTIES:
FREGEX ANTIFREEZE AND COOLANT
PROPERTIES TYPICAL VALUES ASTM Test Methods
Specific Gravity @15C 1.12-1.13 D1122
Boiling Point, Reflux 164C Minimum D1120
Foam Test 50ml/3 sec, maximum D1881
pH, 50% Volume Solution 6.5 Min.-7.5 Max D1287
Reserve Alkalinity 11 ml, Minimum D1121
Flash Point. COC 121C Minimum D92
Color Green  
 

These methods use six different metals (copper, solder, brass, steel, cast iron, aluminum) commonly found in an automotive or truck cooling System. This product has show good compatibility with all nationally distributed water filters and liquid supplemental coolant additives (SCA) The American society of testing and materials (ASTM) sets technical standards for antifreeze. ASTM D-4985 is the published standard for antifreeze used to protect heavy duty truck engines against boil-overs, freeze-ups and corrosion. Fregex meets this heavy duty standard. 

INGREDIENTS:
- Ethylene Glycol, Anti Corrosion Inhibitor and Color
- Biodegradable
- Harmless to the Environment 

HEALTH & SAFETY:
Based on available toxicological information, this product will produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene. Ethylene glycol is considered a poisonous product and if swallowed and not properly treated. If swallowed, don't induce vomiting, seek medical help immediately.

CAUTION:
Keep away from children's reach. 

FIRST AID:
- Internal: drink milk.
- Eyes & skin: irrigate well with water. 
 
GUARANTEE:
Spartan's modem manufacturing and laboratory control insure uniform quality. All products manufactured by Spartan Chemical Co. are unconditionally guaranteed when used as directed. 
 
DESCRIPTION:
Fregex Antifreeze & Coolant is a high quality ethylene glycol based engine antifreeze /coolant designed to protect Aluminum & all other Metals. It meets major automobile manufacturer's specifications for aftermarket antifreeze & coolant. 

- Universal Car & Truck formula
- Protects aluminum & all other metals
- Patented aluminum protection
- Compatible with other standard brands of antifreeze
- Maximum year around freeze-up /Boil over protection
- Meets major automobile manufacturer's specifications
- Protects against rust & corrosion 

Fregex Antifreeze has been subjected to a wide variety of recognized industry tests designed to measure the coolant's ability to protect an engine from corrosion. The results show very low corrosion weight changes by standard ASTM Glassware (D-1384), Simulated Service (D-2570) & Vehicle Service (D-2847) test methods. These methods use six different metals (copper, solder, brass, steel, cast iron, aluminum) commonly found in an automotive or truck cooling System. This product has shown good compatibility with all nationally distributed water filters & liquid supplemental coolant additives (SCA). 

The AMERICAN SOCIETY of TESTING & MATERIALS (ASTM) sets technical standards for antifreeze. ASTM D-4985 is the published standard for antifreeze used to protect heavy duty truck engines against boil-overs, freeze-ups and corrosion. Fregex meets this heavy duty standard. 

AUTOMOTIVE:
- ASTM D-3306, ASTM D-4340
- CSMA
- ChiyslerMS7170
- FordESE-M97B44-A
- GM 1825M (Aluminum)
- GSAA-A-870
- SAEJ1034 

HEAVY DUTY:
- ASTMD-4985
- Caterpillar
- Cummins 90T8-4
- Detroit Diesel 7SE298
- Freightliner 48-22880
- GM 1899M (non-aluminum)
- John Deere H5, Mack
- RP-302B Maintenance Council American Trucking
- SAEJ1941
- Volvo/GM Heavy Truck Corp. 

HEALTH & SAFETY:
Based on available toxicological information, this product will produce no adverse effects on health when properly handled & used. No special precautions are suggested beyond attention to good personal hygiene, including laundering soaked clothing & washing skin contacted areas with soap &.water. Ethylene glycol is considered a poisonous product & can cause death if swallowed & not properly treated. If swallowed, don't induce vomiting, seek medical help immediately. 

TYPICAL CHARACTERISTICS:
Physical appearances shown in the table are typical & may vary slightly.
FREGEX ANTIFREEZE AND COOLANT
PROPERTIES TYPICAL VALUES ASTM Test Methods
Spécifie Gravity @15C 1.12-1.13 D1122
Boiling Point, Reflux 135°C Minimum D1120
Foam Test 50ml/3 sec, maximum D1881
pH, 50% Volume Solution 8.0 Min.- 9.0 Max. D1287
Reserve Alkalinity 11 ml, Minimum D1121
Flash Point. COC 121C Minimum D92
Color Green  
 

Freezing point/ Boiling Point ( 6.8 Kgs. Radiator cap)
 
Concentration of Coolant in water by Volume Freezing Point in °C Boiling Point in °C
40% -2 101.3
50% -6 101.2
60% -12 100.2
70% -20 100